JJ Autowerks

Straightline Motorsports MR2 K swapped No need to cut the firewall

Our KR2 (MR2 k swap) turbo manifolds are fabricated from 304 Stainless Steel Sch 40 pipe, all professionally Tig Welded and Backed by Lifetime warranty against cracking. Manifold does not  need the firewall cut or trimmed. All our manifolds are back purged for the strongest,cleanest welds possible. Each of our manifolds are hand ported to ensure maximum flow, and all surfaces are milled so that there is no room for leakage. Also there is no need to relocate anything, we did all the hard work to make this a drop inn manifold, These manifold are built to accommodate up to a 7675 turbo. This manifold is set up for a 60mm wastegate. We also offer downpipe and dumptubes to go along with these manifolds Contact us for more info. Note We try to keep our manifolds in stock but also sell them locally, if we are out of stock, Please allow 4-6 Weeks maximum to fabricate. We fabricate many types of manifolds for all Honda`s/Acura` s please contact us if you do not find what you are looking for. 

 
Key Features:
Back purged for the strongest welds possible
No Need to Relocate Anything
Fabricated from 304 Stainless Steel sch 40 tubes
V-Band Inlet flange
Single 60 or 44mm wastegate flange
Low angle Entry collectors for maximum flow-(Fabricated Inhouse)
1/2 inch thick mild steel flanges
Hand ported Collectors/ All sealing surfaces milled
Direct Fitment for all k-series Mr2 for turbos as large as 76mm
Backed by lifetime warrenty against cracking