T1 Cam Trigger Kit B Series
T1 Cam Trigger Kit - B series
The use of this kit allows you to change from the factory honda mag sensors in the distributor to a more precise digital signal from this sensor.
Many aftermarket ECU's read the Hall signal much better than they do the OEM signal from the distributor. A lot of times you'll notice a smoother idle & much smoother power at high rpm. This also allows complete removal of the factory distributor when a multi channel CDI box & individual coils are used with it.
If you want to keep a single channel ignition box & the distributor, then this setup can still be used.
Another option is to use 3 wire smart coils and no CDI box. These signals are on the input side of the ecu, while the ignition system is on the output. Any combination of ignition box/coils will work.
The standard kit consists of:
The use of this kit allows you to change from the factory honda mag sensors in the distributor to a more precise digital signal from this sensor.
Many aftermarket ECU's read the Hall signal much better than they do the OEM signal from the distributor. A lot of times you'll notice a smoother idle & much smoother power at high rpm. This also allows complete removal of the factory distributor when a multi channel CDI box & individual coils are used with it.
If you want to keep a single channel ignition box & the distributor, then this setup can still be used.
Another option is to use 3 wire smart coils and no CDI box. These signals are on the input side of the ecu, while the ignition system is on the output. Any combination of ignition box/coils will work.
The standard kit consists of:
- 1 Golden Eagle cam gear that's been machined & custom fit with rare earth magnets installed in it.
- 1 Dual Pole hall sensor & it's mating connector.
- The billet sensor bracket
- With installation instructions.
